Touch Screen Pos

IBM 12 Pos Monitor TFT Elo Ir-Touchscreen Display 4820-2 GB 07K6086 Posdisplay


IBM 12 Pos Monitor TFT Elo Ir-Touchscreen Display 4820-2 GB 07K6086 Posdisplay

IBM 12 Pos Monitor TFT Elo Ir-Touchscreen Display 4820-2 GB 07K6086 Posdisplay   IBM 12 Pos Monitor TFT Elo Ir-Touchscreen Display 4820-2 GB 07K6086 Posdisplay
Professional 30cm (12) IBM POS monitor 4820-2GB. With a very high-quality capacitive ELO touch screen via USB. Power supply and power cord. Resolution 800x600, IBM p/n: 07K6086, used, in excellent condition, without foot.

On the back there are 4x screw-in options, possibly E. For wall mounting, you can possibly make a base out of plexiglass, or attach it to the bar column, etc. For this monitor there is a magnetic card reader that you HERE. Capacitive touchscreens (like the iPhone) are a touchscreen variant of the.

This is due to the fact that this is an electric field that is built up over four corners and has a uniform voltage. With a finger or a conductive object, this field is now changed and sensors can be used to detect where the contact is taking place.

Capacitive touchscreens: Their design is very different from that of resistive monitors, although the two systems share similarities. As with the models mentioned above, this technology is also based on a touch-sensitive layer on the surface of the monitor. How a capacitive touchscreen worksHow a capacitive touchscreen works In this case, the glass surface of the monitor is coated with a conductive layer, usually made of indium tin oxide (ITO). In a very small thickness, this material is transparent.

This layer is connected to electrodes located on the edges of the monitor. This creates a uniform electric field on the surface of the monitor.

Or to put it another way: The surface is evenly charged. When a finger approaches this electric field, some of the charge jumps onto the finger. This disturbance is then perceived by the control of the monitor.

In the first capacitive touchscreens, the ITO layer was attached to the outside. It therefore wore out quickly, which limited the life of the product.

Today, the algorithms for touch detection are so advanced that a greater distance between the ITO layer and the finger is possible. The surface of the monitor now only consists of simple glass. So wear and tear is no longer an issue. The main advantage of capacitive touchscreens lies in the much less reduced brightness of the monitor. The low thickness of the conductive layer ensures high transparency (over 90%).

They also offer excellent resolution. And the control module is particularly compact.

However, they are still significantly more expensive than resistive touchscreens. Item condition: Used, is in good optical condition. In this case, the glass surface of the monitor is coated with a conductive layer, usually made of indium tin oxide (ITO).

Today, the algorithms for touch detection are so advanced that a greater distance between the ITO layer and the fin. This item is in the category "Computers/Tablets & Networking\Monitors, Projectors & Accs\Monitors"." and is located in this country: DE.

This item can be shipped worldwide.


IBM 12 Pos Monitor TFT Elo Ir-Touchscreen Display 4820-2 GB 07K6086 Posdisplay   IBM 12 Pos Monitor TFT Elo Ir-Touchscreen Display 4820-2 GB 07K6086 Posdisplay